This page records an engine oil filter for an XCMG loader, but the original product entry does not provide a filter number. A safe match begins with the label on the removed filter and the engine identification plate. Thread size, sealing diameter, canister dimensions and lubrication specification must agree.
Information Needed for a Correct Match
| Product type | Engine oil filter |
|---|
| Application | XCMG loader engine lubrication system |
|---|
| Part number status | Not stated; confirm from the filter label or engine parts data |
|---|
| Physical checks | Mounting thread, gasket diameters, canister diameter and height, base-plate layout and clearance |
|---|
Photograph the complete filter label before removal. Dirt, paint and wrench damage can hide digits after service. Also photograph the base and note whether the existing seal remained on the engine.
Why Appearance Is Not Enough
Two spin-on filters may look similar but use different threads, gasket positions or internal valve arrangements. An incorrect filter can leak, loosen, restrict flow or fail to protect the engine. This page does not publish an unsupported filtration rating, bypass setting or compatibility list; verify these from the exact filter reference.
Read the Removed Filter and Used Oil
Inspect the canister for distortion, rubbing or impact. Check the gasket for uneven compression and confirm that only one gasket was installed. Metal debris, coolant contamination, heavy sludge or a collapsed element should trigger wider diagnosis. Replacing the filter alone will not correct fuel dilution, coolant ingress, overheating or internal wear.
Clean Installation Procedure
Stop the engine safely and follow the procedure for hot oil and stored pressure.
Clean the filter head before removal.
Confirm the old gasket has come away; a double gasket can leak rapidly.
Compare label, thread, base plate, seal position and size.
Lubricate the gasket with specified clean oil and tighten by verified instructions.
Use the engine procedure to restore oil pressure; do not assume pre-filling is allowed.
Start the engine, verify oil-pressure indication, inspect leakage and recheck level.
Related XCMG Loader Engine Parts
Routine work may also involve the XCMG fuel filter, the water pump 612600060131 and the WD615.67/68 repair kit. These links support maintenance planning; they do not establish compatibility or inclusion with this oil filter.
Frequently Asked Questions
What is the part number?
The source record does not state it. Send the filter label and engine plate so the correct reference can be checked.
Can I order using only the loader model?
The engine configuration may vary. Confirm engine serial, filter label, thread and sealing dimensions.
What is the service interval?
No interval is claimed here. Follow the loader and engine maintenance schedule and actual operating conditions.
Should the filter be pre-filled?
Use the engine manufacturer's procedure. Orientation and contamination control determine whether pre-filling is appropriate.
Quotation checklist: send loader and engine serials, full filter label, base and side photos, thread and gasket measurements and canister dimensions.
