Copper Groove Component 381600371 / PY180G.10.1-3
This product record identifies a copper groove component with references 381600371 and PY180G.10.1-3. “Copper groove” may be a translated catalog description, so this page does not assign an unverified function such as bushing, thrust plate or bearing element. The safest match uses the assembly drawing position, original part profile and measured dimensions.
Quotation tip: Send the parts-book diagram with the item position circled, plus photographs of both faces and the edge profile. Small copper-coloured parts are difficult to identify from one front view.
Part name alone is not enough
Reference 381600371 may be used as a purchasing number, while PY180G.10.1-3 appears to be a drawing-style reference. Confirm both against the original documentation. If the removed item is worn or distorted, measure an unworn mating surface where possible and include the adjacent components in one wider photograph.
| Listed references | 381600371 / PY180G.10.1-3 |
| Catalog description | Copper groove component |
| Application evidence | PY180G appears in the reference; exact configuration requires confirmation |
| Match points | Drawing position, outline, holes, grooves, thickness and mating surfaces |
Measurements that help identify the component
Overall length, width and thickness at several unworn points.
Inside and outside diameter if the part is curved or ring-shaped.
Number, diameter and centre spacing of holes or slots.
Groove width, depth and distance from a clear reference edge.
Any stamped number, orientation mark or oil passage.
Machine model, serial number and assembly drawing page.
Inspect the mating assembly
Uneven polishing, edge deformation, scoring or embedded debris can provide clues about alignment and lubrication, but a technician should interpret those signs in the context of the complete assembly. Check the mating surface and retaining parts before installing a replacement. Do not reuse damaged fasteners or add clearance by uncontrolled grinding.
Handling and installation planning
Protect soft or precisely finished surfaces during transport and storage. Keep the component clean and dry, and avoid bending it during measurement. Installation direction, clearance and lubrication should follow the service information for the confirmed machine. If the drawing gives a matched set or selective fit, order and install accordingly rather than assuming one loose piece is sufficient.
Related motor grader mechanical parts
For other mechanical references in this category, review the double-row sprocket 800107297 / 85513022 and the wheel reducer assembly 800345910 / 83513200. These links are for related-product navigation and do not indicate that the items share one assembly.
FAQ
What is the exact function of 381600371?
The available record does not define it reliably. Confirm the item’s function and position from the PY180G parts drawing.
Does PY180G.10.1-3 confirm every PY180G grader?
No. Use the full machine serial number and parts-book revision because assemblies can change by configuration.
Can the material specification be confirmed from the name “copper groove”?
No. The description is not a verified material certificate or alloy specification.
What evidence is needed for supply?
Send both references, a circled diagram position, dimensions, photos of every face and the machine serial plate.
Compatibility note: Final matching depends on the assembly drawing and physical profile, not the translated name alone.
