Connecting Rod Bearing T31132011 for Lovol Excavator Parts Requests
The Lovol excavator catalog record identifies this component as a connecting rod bearing and provides reference T31132011. It does not give bearing size, undersize or oversize grade, material, clearance, engine model or serial range. Those are essential details in a precision engine-part decision. Buyers should treat T31132011 as the starting identifier and confirm the exact engine configuration and bearing grade using the machine’s serial number, engine plate and current parts or service information. Do not choose a shell by appearance, nominal dimensions or an assumed interchange. If the engine has been machined previously, the required grade may depend on measured journal and housing dimensions; the responsible engine workshop must confirm that before an order is placed.
Why Grade and Engine Identity Matter
A connecting rod bearing is selected to work with a specific crankshaft journal and connecting-rod housing within specified clearances. The source record supplies only a part number, not those specifications. A bearing that looks comparable may still be unsuitable if the engine variant, journal size or repair history differs. Ask the technician to record the engine model and serial number, any marking on the existing bearing shell, and the measured condition that led to replacement. If the crankshaft has been ground or the rod has been reconditioned, state that clearly. Avoid translating a workshop shorthand into a guessed “standard” or “repair” grade. The seller can then verify availability and match the requested reference against the technical evidence.
Make a Traceable Identification Package
For a parts inquiry, provide a photo of the engine identification plate, the excavator serial number and the full number T31132011. Add the illustrated parts-book page or connecting-rod callout if available. A clear image of the old shell’s back and face may reveal markings useful to the engine builder, but it cannot substitute for measuring the crank journal and rod housing. Keep left/right or cylinder-position notes if the technician’s process uses them, and do not mix used bearing shells from different positions. If no original shell remains, state that rather than copying a reference from another machine. This is a practical way to distinguish an evidence-based request from a general search for an excavator engine bearing.
Workshop Planning Before Ordering
Engine repair work is often sequenced around inspection and measurement. A team may identify a suspect bearing, then wait for crankshaft and connecting-rod checks before selecting the exact grade. Ordering too early can create delay if the measurement later calls for a different specification. This page does not define wear limits, clearance values, oil requirements or installation torque. Use the engine manufacturer’s service information and a qualified engine technician for those decisions. For procurement, the buyer can still prepare the quotation request in advance by sharing T31132011, engine identity, quantity and destination, while marking the final grade as pending confirmation if the inspection is not complete. That keeps commercial preparation moving without disguising an unresolved technical question.
Receiving and Storage Notes
When the bearing arrives, compare the package label, part reference, grade markings and ordered quantity with the supplier’s confirmed quotation. Keep each shell in its original clean packaging until the engine builder is ready to inspect it. Avoid touching precision surfaces with dirty hands, stacking loose shells together or exposing them to abrasive dust. If markings differ from the approved reference, pause and request clarification. The supplier should state what was supplied; the technician should determine whether it is appropriate for the measured engine. Retain the label and work-order trace so future service staff can understand which reference and grade were used. These handling reminders are not a substitute for the manufacturer’s storage instructions or installation procedure.
Related Engine Catalog Entries
The site also lists a Lovol excavator engine water temperature sensor 9F850-64A110000A0 and a Lovol excavator exhaust valve T3142A051. These links point to separate engine-related records; they do not establish that either item fits the same engine or is required for a bearing repair. Keep each part request independent and verify it against the engine model and serial number. If a larger engine overhaul is being quoted, list bearings, valves, sensors and other parts as distinct lines with their own references and confirmation status. That makes the order easier to review and prevents a broad “engine parts” request from hiding a grade-sensitive component.
Connecting Rod Bearing Quote Checklist
| Check | Information to send |
|---|
| Catalog reference | T31132011, copied exactly from the record |
| Engine identity | Machine serial number and engine plate details |
| Grade evidence | Existing shell marks and workshop measurements, when available |
| Repair history | State whether crankshaft or rod machining has been performed |
| Order details | Quantity, destination and fitment-confirmation request |
Including these details supports a more useful quotation and helps the parts team identify whether the question concerns the reference itself or the required bearing grade. Do not request a guessed clearance or machining size from a generic parts listing. If the technical check is still open, say so and ask what evidence is needed to finalize the order. The listing provides a catalog number and product category, not a complete engine specification or a guarantee that one bearing grade suits every overhaul.
Frequently Asked Questions
Does T31132011 identify the bearing grade?
The source record gives the number but no grade or size. Confirm the engine variant and measurement-based selection with the service information and engine workshop.
Can I order by excavator model alone?
Provide the complete machine serial number and engine plate information as well. Model names may span different engine configurations or production revisions.
What if the crankshaft was machined?
Tell the supplier and engine builder. The bearing selection must follow the measured journal and housing dimensions and applicable technical specification.
Does this listing include a set for all cylinders?
Pack quantity is not stated. Ask the supplier to specify the number of pieces per quoted line and order quantity.
Request a Bearing Identification Check
Send T31132011, the machine and engine identification details, measured repair information where available, the required quantity and destination. Include photographs of the engine plate and existing bearing markings, while keeping all dimensions attributable to the technician who measured them. Ask the supplier to confirm the quoted reference and to clarify what grade or package is being offered. When technical measurements are not yet complete, mark the grade selection as pending instead of assuming a standard size. This supports accurate Lovol excavator engine-parts sourcing and gives the repair team a clear record to review before the engine is assembled.