Description

This entry corrects the catalog spelling to Intake Valve T3142L072. The product is filed under Lovol Excavator, and the listed part number is T3142L072. The record does not state engine family, valve-head diameter, stem dimensions, seat angle, material, or the machine serial range. Those specifications should not be guessed from the product name. Confirm the number against the engine or machine parts book and compare the removed valve before placing an order.

How an intake valve fits into engine operation

An intake valve opens and closes as part of the engine’s valve train, controlling the passage into the combustion chamber according to the engine’s timing. Its condition and correct seating matter to compression and consistent operation. A worn, bent, burned, or incorrectly installed valve can contribute to starting difficulty, uneven running, reduced performance, or abnormal noise, but those symptoms can also have other causes. This page provides a parts identification record, not a diagnosis or a specification sheet.

Valve dimensions and configuration vary by engine. Even within a product family, changes can occur across serial ranges or engine revisions. A valve that appears similar may have a different stem length, keeper groove, head profile, or seating geometry. Those differences are not reliably judged from a thumbnail photograph. Use the stamped part number and the authoritative parts illustration. If the number is unreadable, identify the engine model and serial and ask a technician or parts desk to confirm the correct branch of the catalog.

Evidence to gather before ordering T3142L072

Record the complete machine plate and engine plate, including all letters and digits. Photograph the existing valve’s markings if accessible, then take clear images of its head, stem, keeper area, and overall length after removal. Do not clean away markings with an abrasive tool. Keep intake and exhaust valves separated and tagged by cylinder position during a teardown; they may look similar while serving different roles or having different specifications.

If the engine has already been opened, note the repair context: routine overhaul, cylinder-head inspection, suspected leakage, or replacement of a damaged component. State whether one valve or a set is required, but do not assume the package quantity from this listing. Ask the supplier to confirm quantity, supplied components, and whether any related retainers or seals are separately listed. The catalog record shows the valve and part number only.

Inspection and workshop preparation

Engine valve work requires a clean bench and the correct service procedure. Before removing components, isolate the machine, allow hot parts to cool, and follow the manufacturer’s safety instructions. Keep debris out of open intake ports and cylinders. Label each component by cylinder and position so inspection findings remain traceable. If a valve is being evaluated, measure it with appropriate calibrated tools and compare the results with the engine manual; this catalog page publishes no measurement limits.

Inspect the valve and related seat using the method specified by the engine documentation. Look for visible damage, uneven contact, deposits, scoring, deformation, or signs of overheating, while recognizing that a visual check is not a substitute for required dimensional or leak testing. The cause of damage should be investigated before fitting a replacement. Contamination, lubrication, cooling, fuel condition, valve timing, and operating factors may all require attention depending on the engine design.

Do not grind, lap, machine, or re-use a valve unless the engine manufacturer’s procedure allows it and the technician has confirmed it remains within specification. An improvised repair can alter geometry or material condition. Keep replacement parts clean and protected until use. Use approved assembly lubricant and installation tools where required, and ensure retainers and keepers are seated correctly. Incorrect assembly can lead to severe engine damage.

Installation and post-repair verification

Before assembly, compare the replacement number and physical details with the approved engine parts data. Confirm valve orientation and cylinder position. Install the valve using the correct guide, seat preparation, spring, retainer, and keeper procedure for the engine. Set clearances and timing only to the specified values, which are not provided by this listing. If the manual requires new seals, springs, or related hardware, order them as separate confirmed items.

After the cylinder head is assembled, carry out the prescribed checks before starting. Turn the engine by hand if the service method calls for it, confirm timing and clearances, and complete any pressure or leak test. Start only in a safe, ventilated area and monitor the engine under the approved commissioning process. If noise, smoke, misfire, or compression issues remain, stop and diagnose them rather than assuming the new valve has solved the problem.

How to request the correct valve

Send part number T3142L072, the machine and engine plates, serial information, and a clear photograph of the removed component beside a scale. Include the cylinder position, the number of valves required, and the manual or diagram reference. Ask the supplier to confirm whether the part is intake-specific for the identified engine. These details help distinguish the correct valve from a visually similar exhaust valve or an alternate revision.

For adjacent engine maintenance references, keep this item separate from the cylinder liner and main bearing records. See the Lovol liner identification page and the main bearing T81558 record; each requires its own engine and serial verification.

Frequently asked questions

Does T3142L072 identify a specific engine model here?

The catalog record supplies a number and category but no engine application table. Verify the engine code and serial range in the relevant parts documentation.

Can I use a valve that has the same appearance?

No. Compare the part number and measured features with the engine specification. Similar appearance does not prove that stem, groove, seat, or head geometry match.

Should the valve be replaced as a complete set?

The appropriate repair scope depends on inspection results and the engine manual. This record does not state a kit or quantity; confirm what is required for the identified engine.

What information should accompany an enquiry?

Provide both identification plates, the complete part number, engine serial, cylinder position, clear valve images, and the parts-diagram reference.

Catalog facts at a glance

Corrected item nameIntake valve
Part numberT3142L072
CategoryLovol Excavator
Engine fitmentNot stated; confirm with engine code, serial and parts manual

Reliable valve sourcing begins with accurate engine identification and continues through clean assembly and documented checks. Use the product number as an inquiry reference, then confirm every specification and repair step from the correct engine information.

FREE Inquiry Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+86-130-4508-1859

Get A Quote