This catalog record identifies a piston pin, part number T3313T005, under Lovol Excavator. A piston pin connects the piston and connecting rod in an engine design that uses this arrangement, allowing the assembly to move through its operating cycle. The entry does not publish the engine code, pin diameter, length, material, coating, fit class, or serial range. Those details cannot be inferred from a photo or the word “piston pin.” Confirm the installed engine and the relevant parts diagram before ordering.
Why the piston pin must match its piston and rod
The pin works as part of a matched group that can include the piston, rod small-end bush, retainers, and lubrication features. Design differences may include a floating or press-fit arrangement, pin retention method, oil passage, and clearance. This product listing does not say which arrangement applies. A substitute with the wrong diameter or retention style may not assemble correctly or could cause premature wear. Use the engine manufacturer’s specifications rather than choosing a pin that only appears to fit the piston bore.
During an overhaul, wear marks, scoring, noise, or excessive clearance can prompt inspection of the pin and its mating parts. These signs have multiple possible causes, including lubrication, contamination, misalignment, or wear in the rod bush or piston. Document the finding and measure the pin and mating surfaces with calibrated tools. A used pin may be worn or distorted and should not be treated as a reference dimension. This page is a sourcing record, not an engine repair diagnosis.
Confirming T3313T005 before purchase
Read the machine identification plate and, where accessible, the engine plate. Record the engine model and complete serial number, especially if the engine has been replaced. Find the piston-pin callout in the correct parts illustration and confirm any serial break, revision, or kit relationship. Copy T3313T005 exactly. Ask whether the listing is for one pin, a pair, or a package quantity; the current record does not state quantity or included retainers.
Photograph the old pin after removal with both ends and any markings visible. Capture the retaining features and oiling details if present. Keep the pin tagged with its piston and cylinder position. If the assembly is already disassembled, do not mix pins between cylinders or separate paired components without labeling them. Include a ruler for visual comparison if useful, but provide actual measured values only when taken using the engine manual’s method.
Inspection and measurement approach
Engine internal work requires a clean, controlled workshop. Isolate the machine, allow the engine to cool, and follow the service manual for draining, access, and component removal. Protect open cylinders and oil passages from dirt. When the pin is removed, clean it using an approved method and inspect for scoring, cracks, discoloration, bending, and uneven wear. Examine the piston pin bore and rod small-end bush as specified. A new pin cannot correct an out-of-round bore or a damaged bush.
Measure pin diameter at the locations and directions required by the manual, and compare the results with the correct limits for the engine. Check the piston and rod clearances using the prescribed tools and temperature conditions. No tolerance or fit class is published on this product page. Do not polish or grind a precision pin to make it fit; this changes its dimensions and surface. If the rod bush needs replacement or machining, that operation should be completed by a qualified engine shop and checked before assembly.
Inspect lubrication passages and related surfaces for blockage or debris. Record any metal particles found and investigate their source according to the engine procedure. Keep each cylinder’s piston, pin, rings, and rod identified throughout the work. Good organization reduces the risk of reinstalling components in the wrong position and makes the inspection findings traceable.
Fitting and assembly checks
Before assembly, compare the replacement number with the engine parts data and the removed component. Verify orientation, end clearance, retainers, and lubrication features using the manual. Some designs require heating, cooling, or a specific installation tool; others use a different retention method. Do not use a generic technique. Incorrect force can damage the piston, rod, or pin surface.
Install the pin and retainers as specified. Confirm that each retainer is fully seated and that the pin moves or remains fixed as intended for the design. Reassemble the piston, rings, and rod in the correct orientation. Use the specified assembly lubricant and clearances. Torque, ring gap, side clearance, and any end-play values must come from the engine documentation because none are supplied here.
After the engine is closed, follow the prescribed priming and commissioning process. Turn the engine by hand where instructed and confirm there is no unexpected binding. Start in a safe, ventilated area and monitor the checks required by the manual. Stop if abnormal noise, oil-pressure warnings, smoke, or other unexpected symptoms appear. A replacement pin should be evaluated as part of the complete piston and rod assembly.
Ordering details that improve accuracy
Send part number T3313T005, engine plate, serial number, piston or rod markings, cylinder position, and the parts-diagram reference. Include clear photos of the old pin and the mating components. State whether the pin is being replaced after measurement, visible damage, or a broader overhaul, and ask the supplier to confirm quantity and retention hardware. If a piston or ring set is also required, list those parts separately and verify each reference.
For related engine components, see the T4181A026 piston ring record and the T3135J181ETC piston listing. These are separate items; confirm the engine specification and assembly relationship for each before building an order.
Frequently asked questions
Does the listing state pin dimensions or engine model?
No. The record provides the part number and catalog category but no dimensions or verified engine application. Check the engine serial and parts book.
Can the old pin be reused if it looks smooth?
Only if a qualified inspection and measurement show it remains within the engine manufacturer’s limits. Visual appearance alone does not prove serviceability.
Are retaining clips included?
Package contents are not stated. Confirm whether retainers, bushings, or other hardware are supplied as separate items.
What information should accompany a quote request?
Provide engine and machine identification, serial, part number, cylinder position, diagram reference, and clear photos of the pin and mating parts.
Catalog summary
| Catalog item | Piston pin |
|---|---|
| Part number | T3313T005 |
| Category | Lovol Excavator |
| Engine fitment | Not stated; verify against engine code, serial and parts diagram |
Use the number to start a precise inquiry, then match the pin to the actual engine and measured piston-and-rod assembly. That additional confirmation helps avoid a mismatch during a time-sensitive rebuild.