XCMG FA013A Crane Anemometer with Base 803587459
Part number 803587459 identifies an XCMG crane anemometer reference associated with model FA013A and a mounting base. The device is used to sense wind speed for the relevant crane monitoring or indication system. Compatibility must be checked with the installed electrical and display arrangement.
Product Reference and Application
Wind-Speed Monitoring Function
The rotating sensing head responds to airflow and provides a signal to the compatible monitoring system. Correct readings depend on the sensor, cable, connector, supply voltage, display or controller and installation position working together. No unverified measuring range, alarm threshold or ingress-protection rating is claimed on this page.
Verification Before Ordering
Provide a clear image of the original FA013A label and part number, the connector face, cable length and mounting base. Confirm the XCMG machine model and serial number, supply-voltage information shown on the original device and the connected display or controller. Check whether the order requires the sensor only, the base or the complete assembly.
Installation and Service Guidance
Mount the anemometer in the specified location with an unobstructed airflow path and the correct orientation. Protect the cable from sharp bends, abrasion and water entry at the connector. After replacement, check free rotation and compare the indicated wind speed with the machine service procedure. Safety-related alarm functions should be tested by qualified personnel.
Packing and Export Supply
The sensing head, cups or rotor, cable and base are cushioned separately to prevent bending or impact. The assembly is placed in a rigid carton or plywood case with moisture protection for export transport.
Frequently Asked Questions
Does 803587459 include the mounting base?
The page reference states an anemometer with base, but the exact supplied scope should be confirmed in the quotation.
Can FA013A be connected to any crane display?
No. Verify the connector, voltage and compatible controller or display before ordering.
What should be checked after installation?
Check free rotation, cable routing, connector sealing, indicated wind speed and the applicable alarm function.