FA113B-3W40SG3 Anemometer for XCMG Truck Cranes
The FA113B-3W40SG3 anemometer measures wind speed for compatible XCMG crane monitoring systems. Correct exposure, free rotor movement and signal compatibility are important for stable readings.
Identification and Matching
FA113B-3W40SG3 label
Cup/rotor condition and rotation
Connector, cable length and pinout
Supply and output specification
Mounting mast and system display model
Application and Service Scenarios
Investigate after zero, intermittent or implausible wind readings, physical impact or seized rotation. Ice, contamination, damaged cable, poor supply and incorrect display settings can produce similar symptoms.
Inspection and Installation
Mount upright in an unobstructed location, secure and weatherproof the connector, protect the cable and verify zero plus response to controlled airflow according to the service process.
Frequently Asked Questions
Does a zero reading prove failure?
No. Check rotor movement, power, cable and display input.
Can it be mounted behind a structure?
Obstruction can distort airflow and readings.
Must alarms be tested?
Yes. Verify indication and configured wind-warning response.
Export Packing
The rotor is immobilized without loading its bearings and the sensor is moisture-protected in a rigid carton.
