SG2501B is an electronic flasher reference listed for turn indicators and hazard warning lights on SANY truck crane applications. Confirm the reference on the installed flasher, the vehicle electrical diagram and the actual lighting circuit before ordering. The flasher belongs to the vehicle lighting system. Use the crane chassis records when locating it in a parts book.
Is the job for turn signals, hazards or both?
Write the reported function on the service ticket. The technician may have a request for a flasher after checking both functions, or the job may concern only one branch of the lighting circuit. Purchasing should use the part selection returned by the workshop. A turn or hazard report can also involve lamps, connections or controls. The product reference identifies the component to be ordered when the flasher has been confirmed for replacement. It leaves the diagnosis with the vehicle technician.
On a mobile crane, the road-lighting assembly is generally documented with the carrier or chassis. Include the full vehicle model and serial or chassis reference and state that the order concerns the indicator and hazard circuit. If the diagram shows a fuse or relay panel location, mark the flasher’s callout in that panel. Photographs of the entire panel can help a supplier distinguish adjacent similar housings. Put a label or arrow on the photograph to identify the actual position required.
Compare the label, terminal identification and vehicle lighting version
Send a clear photo of the installed unit’s full marking, including any characters after SG2501B and the voltage printed on the label. Include the face with the connector or terminals in a separate picture, with any identifying marks visible. When the old flasher is already out and available to the workshop, ask the technician to record the accessible connector features and the position shown on the electrical drawing. This evidence helps distinguish plugs that have a similar outside shape.
The vehicle diagram and the service team’s records should establish the applicable terminal or circuit requirements. Ask the supplier to confirm the offered part against those documented requirements and the lamp configuration. A chassis with a repair history or different lamps may need a closer check. If the lighting has been changed, report what the technician knows about the currently fitted equipment so the seller can explain how it matched the flasher. Confirm the electrical requirements before accepting a replacement under another number.
Quote the flasher separately from the socket or harness
A quote for a flasher may cover the module only. If the workshop also needs an associated socket, connector housing or wiring repair part, ask for that item separately using its drawing reference and visible identification. Separate order lines are useful when the flasher is available and the socket is still being identified. Ask the seller to show the item provided and any included fittings. Include the accepted component description on the order so the warehouse can compare it with the shipment.
When a buyer cannot read the number on a weathered unit, send the remaining marks and the chassis drawing with a photo of the fitted position. Identify any markings from an earlier invoice as a separate source. Ask the supplier which evidence ties SG2501B to the actual vehicle. If it quotes a replacement under its own number, request a written reference covering the chassis, electrical requirements and terminal arrangement indicated by the authorized technical reviewer.
What to check for a fleet that includes more than one crane chassis
A fleet stock label that says “SANY relay” leaves the storekeeper with too many possible locations. Put the reference and the function “turn and hazard flasher” on the label. Attach the approved chassis application files so the next order can be reviewed without relying on the shape of a relay case. If several holdings share one bin, compare their labels and documented applications before replenishing from a different supplier.
Use the SANY and Zoomlion truck crane parts catalogue for other items on a service order and check each machine separately. For example, the SANY crane controller A810201206088 is a separate electronic component with its own application check. Record whether the job concerns the vehicle lighting or another crane function before sending the complete list to a supplier.
Receiving the replacement flasher
Compare the printed reference, connector arrangement and rest of the visible identification to the approved quote before putting the unit into stock. If the seller uses a distributor label on the carton, record the offered reference and the confirmed SG2501B cross-reference together. Keep the packaging and associated paperwork with the item until the workshop picks it up. A second storekeeper should be able to tell which vehicle it was bought for by reading the order and stock records.
If the technician specified a flasher and a separate electrical socket, verify each line individually at receiving and preserve their labels. If the two items arrive at different times, let the service coordinator know which piece is still pending. Follow the authorized vehicle electrical service instructions for installation and functional checks. When an item comes back with a different marking, keep it identified with the order until the seller and technician confirm the correspondence.
If the flasher is held as an emergency spare for a service vehicle, include the approved chassis list and lighting configuration on its stock card. An electrical repair can bring in a replacement socket or lamp type without changing the name used in the parts system. Review the stock record after such work so the night shift can identify which supported chassis the reserve item belongs to. Keep the documented electrical check associated with the offered reference when another supplier is used.
How do I know that the flasher suits the lighting voltage?
Provide the label and the authorized circuit reference from the actual chassis. Ask the supplier to confirm the offered electrical requirements and connector identification. Use the technician’s confirmation when the old unit’s marking is incomplete.
What if the lamps or wiring changed during an earlier repair?
Tell the supplier and technician what is known about the current installation. Send any updated parts or service records and identify the flasher position on the drawing. A light assembly with a different specification may require the technical reviewer to confirm the flasher separately.
Does the flasher include a socket?
Confirm the package contents in writing. If the work order calls for a socket, use its own reference and quantity unless the quoted supply explicitly covers it. Keep that distinction on the receiving sheet.