4WE6Y-A/D24T Solenoid Directional Valve for XCMG Crane
The 4WE6Y-A/D24T is a solenoid-operated directional valve used in compatible XCMG truck-crane hydraulic control circuits. The Y spool function, 24 V DC coil and port interface all need to match the original valve.
Before ordering: provide the full valve label, XCMG crane model and serial number, coil connector photo, manifold view and the function controlled by the valve.
Electrical and Hydraulic Checks
Valve code: 4WE6Y-A/D24T
24 V DC coil and connector orientation
Spool function and spring-return arrangement
Port pattern, seals and manifold mounting dimensions
Fault Diagnosis
A function that fails in one direction can be caused by the coil, connector, controller output, contamination or a sticking spool. Confirm command voltage and hydraulic pressure before replacing the complete valve.
Installation
Depressurize the circuit, keep the manifold clean, replace the correct seals and tighten evenly. Energize the coil only at its rated voltage and test the crane movement slowly without load before normal service.
Related Hydraulic Control Part
Compare the surrounding circuit with the XCMG telescoping and lifting command valve.
Buyer FAQ
Can another 4WE6 spool code replace the Y spool?
No. Spool symbols define the oil paths and neutral behavior; an incorrect code can reverse or block the intended function.
Does a 24 V coil confirm compatibility?
No. The valve body, spool, connector, mounting pattern and circuit function must also match.
Export Packing
Hydraulic ports are capped, the coil connector is cushioned and the valve is sealed against moisture and contamination.
