This bulldozer listing identifies a friction disc as 16Y-16-02000. It does not name the assembly position or state disc dimensions. Confirm the reference in the machine parts diagram and check which mating plates and quantity are required for the repair.
Match the complete friction pack
Provide the machine model and serial and the assembly reference where 16Y-16-02000 is used. During teardown, keep removed discs in order if the service manual calls for position-specific inspection. Measure thickness and inspect the mating surfaces using the manufacturer’s procedure. A disc that shares the same general shape may have different friction material or thickness.
Check the cause of wear
Inspect the full assembly for heat marks, contamination, glazing or uneven contact. Review fluid condition and adjustment requirements where they apply to the identified system. Follow the prescribed installation sequence and clearance checks; no specific dimension or torque value is given on this page. Replace only after confirming the correct part and repair scope.
Another disc-style record is listed as Disc B 16Y-16-00011. The name and number differ; verify each one in the machine diagram rather than assuming they belong to the same pack.
Buyer questions
Where is 16Y-16-02000 installed?
The listing does not specify the assembly. Confirm its position in the catalogue.
How many discs are included?
Package quantity is not stated. Ask the supplier to confirm it.
What should be inspected with the disc?
Check mating plates, wear pattern and assembly clearances using the service procedure.
