Model 8100 Injector for XCMG QY70K
An injector should be matched to the engine fuel system, not only the crane model. “8100” is a starting reference; the complete injector markings and engine plate provide the buying evidence.
| Customer priority | Customers usually ask whether it is calibrated, whether a set is needed and what engine information to send. |
| Evidence needed | Engine model and serial number Complete injector body/nozzle code Connector or fuel-line interface Old injector calibration/class code Quantity and cylinder position
|
Diagnosis Before Replacement
Hard starting, smoke or rough running may come from injectors, but compression, fuel pressure, timing, air intake and wiring must also be checked.
Fit, Test and Handover
Keep the fuel system clean, use new specified seals and torque lines correctly. Code or calibrate where required, then check leakage, balance and exhaust condition.
Useful Internal References
XCMG QY70K Steering Pump · XCMG Crane CAN Communication Board
FAQ
Should all injectors be replaced?
Base the decision on testing and engine condition.
Is crane model enough?
No; provide the engine and injector codes.
Can dirt damage a new injector?
Yes, strict cleanliness is essential.
Export preparation: Nozzle and connections are sealed in clean, cushioned packaging.
