Description

Wheel Loader Differential Cage | Verify Catalog Reference

Wheel Loader Differential Cage | Verify Catalog Reference is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. The title and part field contain an unclear 50M.01-11 reference. Verify the exact cage callout and axle assembly before ordering. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.

Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

Wheel Loader Differential Cage | Verify Catalog Reference product reference
Existing catalog image for visual reference. Confirm the actual label, configuration and supplied item against the quotation.
Order checkCurrent recordEvidence to confirm
ProductWheel Loader Differential Cage | Verify Catalog ReferenceOld-part label and equipment parts illustration
ReferenceNot stated in the verified product recordNameplate, stamped mark or original-item label
FitmentWheel loader parts category; manufacturer, model and serial range are not specified.Machine model, serial and assembly version
Package scopeCatalog does not itemize accessoriesConfirm each quantity and included item on the quotation

Resolve the unclear carrier callout first

A differential cage locates internal gears and bearings, so its exact configuration is tied to the axle variant. The identifier on this page is malformed.

The title and Part Number field do not provide a clean confirmed MPN; ratio, bearings and included internals are also unknown. Resolve the drawing callout before ordering.

That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.

Read the axle plate before comparing cages

The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.

  • A differential cage locates internal gears and bearings, so its exact configuration is tied to the axle variant. The identifier on this page is malformed.

  • The title and Part Number field do not provide a clean confirmed MPN; ratio, bearings and included internals are also unknown. Resolve the drawing callout before ordering.

  • Read the axle tag and diagram first. Record carrier shape, bearing seats, gear arrangement and shim positions; do not identify a cage from the external outline alone.

  • Compare bearing seats and bolt pattern with the verified drawing. Retain and label adjustment shims for the required setup procedure.

  • Support machined seats, secure the cage against impact and keep internal parts and labels associated with the same work order.

  • State the requested quantity and whether the old item is available for side-by-side inspection.

  • Ask the supplier to list any unresolved fitment point directly on the quotation.

Confirm internal assembly scope

Read the axle tag and diagram first. Record carrier shape, bearing seats, gear arrangement and shim positions; do not identify a cage from the external outline alone.

When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.

Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.

Service notes for Wheel Loader Differential Cage | Verify Catalog Reference

Request written confirmation of the exact cage number and package scope using the machine serial and axle identification. Keep internal parts listed separately.

Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.

A quote scenario using 01-11-and -50M

A practical enquiry for Wheel Loader Differential Cage | Verify Catalog Reference begins with the exact catalog line, equipment serial and a photograph of the installed item. This catalog entry is ambiguous: the title reads “Differential cage 50M.01-11-and -50M” and the Part Number field contains “01-11-and -50M.” Do not treat that text as a validated MPN. Confirm the exact drawing callout, axle version and cage configuration from the machine plate and exploded view before quoting. The quotation should state the confirmed reference and every included component.

This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.

Receiving checks for Wheel Loader Differential Cage | Verify Catalog Reference

Compare bearing seats and bolt pattern with the verified drawing. Retain and label adjustment shims for the required setup procedure.

Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.

Packing and traceability for this part

Support machined seats, secure the cage against impact and keep internal parts and labels associated with the same work order.

For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.

Related product references

The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Wheel reducer 800345910 / 83513200; SDLG L956F torque converter 4110003131.

Frequently asked questions

Is the 50M callout a validated part number?

No. Title and part field are ambiguous; confirm the drawing callout. For this record, the reference to retain is 01-11-and -50M.

Does the page state axle ratio or fitment?

No. Obtain axle identification and parts diagram. For this record, the reference to retain is 01-11-and -50M.

Are gears and bearings included?

The entry does not list them. For this record, the reference to retain is 01-11-and -50M.

Can the carrier be matched by outline?

No. Bearing seats, bolt pattern and gear layout must match. For this record, the reference to retain is 01-11-and -50M.

What to send for a confirmed quotation

Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.

Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.

FREE Inquiry Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+86-130-4508-1859

Get A Quote