Description

The YL-8A oil filter is listed by that code in the wheel loader catalog. The first step in matching it is to identify which system and housing the fitted filter belongs to. Confirm the full code and the type of component required. A request may be for a replaceable element, a self-contained filter or an assembly with a housing. Photographs of the connection and seal help distinguish those scopes.

Part identification before ordering
Catalog referenceYL-8A
Part familyOil filter, exact circuit and offer type to be confirmed
Application evidenceEquipment identification, filter housing or head number and oil circuit drawing
Physical evidenceConnection, sealing face, orientation and dimensions or maker drawing
Scope evidenceOrder line identifying element, complete filter or housing assembly

Use the machine diagram to identify the filter location

A wheel loader can have several oil filters. Identify the one shown on the service sheet by the assembly and the surrounding lines. A clear photo of the installed location helps the parts desk distinguish a filter mounted on a head from an element that sits inside a separate housing. Keep the observation tied to the service interval or repair requested. For drawings that show several filters, highlight the exact callout and keep the rest of the branch visible so the part's location is understandable.

The YL-8A code gives a supplier a catalog starting point. It does not provide a verified engine, hydraulic circuit or transmission application on its own in this listing. If the buyer can provide the housing code, ask the seller to compare it with the proposed replacement. A code from a package stored beside the loader might relate to a previous repair or a different circuit. A legible label from the fitted assembly is more useful when it can be connected to the existing machine.

Photograph the connection and seals separately

For an externally mounted filter, show the end that meets the head and identify the thread or attachment by documentation where possible. For a replaceable element, show both ends and how the element seats in its housing. The supplier may need the locating feature, center connection, sealing face and envelope. Attach a side photo with a reference for orientation. A single picture of the branded side of a filter is usually insufficient to identify its mounting face.

Record whether a seal travels with the replaceable piece or stays on the housing. Ask the supplier if a new seal is included and state which positions you need if there are several. Keep the housing designation separate from the element designation. A quotation identified solely as “oil filter assembly” can hide the fact that the workshop requires only a routinely replaced piece or expects an entire assembly complete with its connections.

Ask which data support an equivalent filter offer

For a proposed equivalent, request the offered manufacturer's specification and make the application clear. Filter media, rated performance and any valve provisions should be compared against the required component documentation. Physical similarity helps narrow the search; a matching attachment does not settle filtration behavior. Avoid stating the rating of the original or replacement based only on the product name. Have the maintenance team confirm the offered specification for the exact system.

An oil filter intended for one position should have its own work-order line even when another filter is required from the same supplier. See our Lonking hydraulic return filter listing and Lonking hydraulic suction filter listing for examples of distinct catalog positions. Those pages do not establish that either filter substitutes for YL-8A or that YL-8A serves one of those positions.

Example from a scheduled service order

A fleet buyer gets a report that five filters are needed before the next service visit. The request calls them all “loader oil filter.” Ask the maintenance planner to attach the service sheet positions and specify quantity per line. Where YL-8A appears, enter its full code and link it to the machine or installed housing. Other entries may have short names that sound similar. Give them separate record lines so the stockroom has a clear basis for assigning the delivered filters to the machine.

If a unit has had a housing changed since an earlier order, send a fresh photo and compare the current fitting against the earlier invoice. Update the approved application only after the supplier and workshop confirm it. This gives the buyer a useful maintenance history: one code can remain as evidence of the old configuration while the current code becomes the reference for new stock. A photo of the original location makes that history easier to interpret.

Compare the parcel with the quote before putting it into service stock

Check the code written on the filter or box, its connection and the seals supplied. If the quote lists a housing but only an element arrives, do not close the order until the workshop confirms that the scope meets the request. Similarly, avoid putting a full assembly into the slot reserved for routine replacement elements. Where a substitute was requested, keep the specification or agreed cross-reference together with the dispatch label.

Give the installation team the matched machine and housing references, particularly when several lookalike filters arrive at once. Any installation instructions, tightening values and service intervals come from the appropriate maintenance literature. The identification information here helps the buyer confirm the commercial part scope and the supporting evidence used for the selection.

When the offered code differs from YL-8A, attach the supplier's documented cross-reference to the purchase record. State which housing and machine were reviewed and whether the proposed scope includes a service seal. If the supplier has offered one element for several uses, record the approved position for this particular request. That gives a receiving clerk a practical way to compare a replacement box with the work order even when the original code appears only on the invoice. For a future order against another loader, start with its installed housing before reusing the previous match.

Frequently asked questions

What should I send if the label only shows YL-8A?

Send a legible photo of that full mark, a wide image of the installed filter, the connection or housing label and the part position on the diagram. Note the equipment serial and oil circuit so the supplier can separate plausible matches.

Does this listing confirm there is a seal or gasket in the box?

Ask the supplier to itemize the offered filter, housing and any seals. The workshop can then note which pieces the replacement requires and what can be sourced separately.

Can a filter with the same thread be used?

Confirm the mounting and sealing surfaces as part of the comparison, then verify the complete documented filter specification required by that oil system, including the intended operating conditions. The offered filter must satisfy the documented requirement for that position.

FREE Inquiry Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+86-130-4508-1859

Get A Quote