Description

Wheel Loader Gear Pump 403601-608

Wheel Loader Gear Pump 403601-608 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Verify gear pump 403601-608 by its label, drive and port arrangement. The catalog does not publish displacement, rotation or machine fitment. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.

Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

Wheel Loader Gear Pump 403601-608 product reference
Existing catalog image for visual reference. Confirm the actual label, configuration and supplied item against the quotation.
Order checkCurrent recordEvidence to confirm
ProductWheel Loader Gear Pump 403601-608Old-part label and equipment parts illustration
Reference403601-608Nameplate, stamped mark or original-item label
FitmentWheel loader parts category; manufacturer, model and serial range are not specified.Machine model, serial and assembly version
Package scopeCatalog does not itemize accessoriesConfirm each quantity and included item on the quotation

Read the pump label and port layout

A gear pump is identified by its label, drive, mounting and ports, not just by a short number. Those interfaces must suit the circuit.

Displacement, flow, pressure rating, rotation and machine application are absent. Confirm the exact build before purchase; same number rows do not prove separate variants.

That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.

Verify drive and circuit details

The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.

  • A gear pump is identified by its label, drive, mounting and ports, not just by a short number. Those interfaces must suit the circuit.

  • Displacement, flow, pressure rating, rotation and machine application are absent. Confirm the exact build before purchase; same number rows do not prove separate variants.

  • Record the symptom and diagnostic checks separately from the pump request. Inspect oil condition, suction path, coupling and circuit per the manual; depressurize and keep the system clean.

  • Compare mounting pilot, drive and ports before installation; follow approved cleanliness, priming and start-up procedures.

  • Cap ports, guard the drive shaft and machine faces, prevent movement in transit and label adapters as separate lines.

  • State the requested quantity and whether the old item is available for side-by-side inspection.

  • Ask the supplier to list any unresolved fitment point directly on the quotation.

Confirm the pump build before opening the system

Record the symptom and diagnostic checks separately from the pump request. Inspect oil condition, suction path, coupling and circuit per the manual; depressurize and keep the system clean.

When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.

Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.

Service notes for Wheel Loader Gear Pump 403601-608

Send the pump nameplate and port/mount photos, ask for confirmed rotation and scope, and state whether adapters or couplings are needed.

Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.

A quote scenario using 403601-608

A practical enquiry for Wheel Loader Gear Pump 403601-608 begins with the exact catalog line, equipment serial and a photograph of the installed item. The same 403601-608 reference appears in more than one catalog row, so this page should not imply that the photographs represent different pump builds. Verify the number on the installed pump and compare the ports, mounting face and drive interface. The record does not specify displacement, rotation, pressure rating or application. The quotation should state the confirmed reference and every included component.

This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.

Receiving checks for Wheel Loader Gear Pump 403601-608

Compare mounting pilot, drive and ports before installation; follow approved cleanliness, priming and start-up procedures.

Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.

Packing and traceability for this part

Cap ports, guard the drive shaft and machine faces, prevent movement in transit and label adapters as separate lines.

For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.

Related product references

The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: XCMG ZL50GN steering pump 803004104; XCMG ZL50GN duplex pump 803013093.

Frequently asked questions

Does this record state pump displacement or pressure?

No, those ratings are absent. For this record, the reference to retain is 403601-608.

Is rotation specified?

No. Verify from the label and circuit data. For this record, the reference to retain is 403601-608.

Are fittings or adapters included?

Not itemized; ask for an explicit list. For this record, the reference to retain is 403601-608.

Will a pump replacement alone diagnose low flow?

No. Diagnose oil supply, coupling and circuit using the manual. For this record, the reference to retain is 403601-608.

What to send for a confirmed quotation

Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.

Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.

FREE Inquiry Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+86-130-4508-1859

Get A Quote