Wheel Loader Scraper Seal SJM03-1,60 | Verify Seal Profile
Wheel Loader Scraper Seal SJM03-1,60 | Verify Seal Profile is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Confirm scraper seal SJM03-1,60 by its groove and lip profile. The catalog does not define what “60” means or list material. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Wheel Loader Scraper Seal SJM03-1,60 | Verify Seal Profile | Old-part label and equipment parts illustration |
| Reference | SJM03-1,60 | Nameplate, stamped mark or original-item label |
| Fitment | Wheel loader parts category; manufacturer, model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Confirm what the suffix means
A scraper or wiper seal protects an exposed moving interface, but fit depends on the lip, groove and installation direction. The catalog suffix needs interpretation.
This record does not define the meaning of “60,” nor list dimensions, compound or cylinder location. Confirm the drawing rather than treating the suffix as a diameter.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Check the groove and lip orientation
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
A scraper or wiper seal protects an exposed moving interface, but fit depends on the lip, groove and installation direction. The catalog suffix needs interpretation.
This record does not define the meaning of “60,” nor list dimensions, compound or cylinder location. Confirm the drawing rather than treating the suffix as a diameter.
Photograph the lip direction and mating rod or sliding face before removal. Inspect for scratches and contamination that may cut a new seal, and follow isolation instructions for the assembly.
Check the supplied lip profile against the old item without stretching it and follow the documented orientation during installation.
Protect the lip from compression, light and sharp edges; separate different seal codes and retain labels for traceability.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
Inspect the sliding face before fitting
Photograph the lip direction and mating rod or sliding face before removal. Inspect for scratches and contamination that may cut a new seal, and follow isolation instructions for the assembly.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Wheel Loader Scraper Seal SJM03-1,60 | Verify Seal Profile
Confirm groove size, profile and the suffix meaning in writing. State whether a companion seal or complete kit is required.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using SJM03-1,60
A practical enquiry for Wheel Loader Scraper Seal SJM03-1,60 | Verify Seal Profile begins with the exact catalog line, equipment serial and a photograph of the installed item. The record calls the item a scraper seal and shows SJM03-1,60; it does not explain the meaning of “60” or specify dimensions, material or cylinder position. Do not read that suffix as a confirmed diameter. Compare the original lip arrangement and groove, and request the relevant drawing when the removed seal is damaged. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Wheel Loader Scraper Seal SJM03-1,60 | Verify Seal Profile
Check the supplied lip profile against the old item without stretching it and follow the documented orientation during installation.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Protect the lip from compression, light and sharp edges; separate different seal codes and retain labels for traceability.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Scraper seal SJM03-1,70; XCMG ZL50GN steering pump 803004104.
Frequently asked questions
Does “60” state a confirmed dimension?
No. The source record does not define the suffix. For this record, the reference to retain is SJM03-1,60.
Is compound or hardness listed?
No. Confirm the profile and compound. For this record, the reference to retain is SJM03-1,60.
Can a similar wiper be substituted?
Only with documented confirmation for the same groove. For this record, the reference to retain is SJM03-1,60.
What surface should be checked first?
Inspect the rod or sliding face for damage and contamination. For this record, the reference to retain is SJM03-1,60.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.