Description

The 31313 tapered roller bearing is indexed in this catalog as GBT297-94, 31313. The short code is enough to start a search, but a quotation for an installed position should also identify the make and suffix of the bearing being offered. If the job card contains both 31313 and 31314, raise two lines and attach a photo or drawing callout to each. The numbers are easily confused when copied from a handwritten note and represent different reference sizes.

Part identification before ordering
Catalog entryGBT297-94, 31313
Product familySingle-row tapered roller bearing
Reference comparisonA published Timken 31313 catalog example has a 65 mm bore, 140 mm cup outside diameter and 36 mm assembled width
Application to verifyActual wheel loader axle or driveline assembly, drawing position and installed bearing marking
Quote unitSpecify one complete bearing set or identify the requested ring

The one-digit error that can hold up the job

A buyer might receive a work order that reads “rear axle bearing, 31313 or 31314.” That note is enough to flag a sourcing problem, but it cannot identify a purchase. Open a separate query for the bearing at the actual repair position. Ask the technician for the assembly tag and the marked-up drawing rather than trying to choose a size from the last digit alone. Once the correct position is agreed, return one nominated reference to the buyer and close the rejected line. Leave the two codes in searchable notes so a later shift understands why both appeared in the first place.

If the drawing is unavailable, request photographs with one label for the cone, one for the cup and one for the assembly. A stamped number can be half hidden by corrosion or the angle of a camera. A photo from directly above the marking is easier to compare than a distant image of the whole axle. Have the technician read the letters aloud or type them into the work order; it is easier to resolve a disputed character when there is both a close-up and an independent transcription.

Use the published dimensions as a cross-check

The 65 by 140 mm bore and cup diameter and 36 mm assembled width in the Timken 31313 comparison are reference catalog data. They give the buyer useful questions to put to the supplier. They do not establish the brand, suffix, interface details or actual dimensions of an unspecified offer. Use the offered maker's drawing for those details. The same overall width can be reported as an inner ring width by mistake, especially on a worksheet that has room for only one width. Ask the technician to label each dimension rather than relying on the order in which three numbers were written.

A published bearing specification may distinguish the dimensions of each ring, the assembled envelope and adjoining shoulders. Those details matter when a nearby shoulder or spacer sets the axial location. Compare the drawing for the offered bearing with the approved assembly drawing. If the bearing number is legible and the measurements disagree, keep both pieces of evidence visible and let the workshop resolve the discrepancy. Replacing the handwritten number with a dimension-based guess can erase the reason the parts do not agree.

The warehouse should see the same part description as the workshop

Write the purchase line so a receiver can match the box to the job. A practical line reads “31313 tapered roller bearing, one complete cone-and-cup set, approved make and suffix per quotation.” Add the machine or axle reference in the work order rather than burying it in a shipping label. When multiple bearings arrive together, keep each bearing set and its package label paired. A plain outer carton may group parts for two different axle positions, and a handwritten stock number on a carton is easier to misread than the full bearing label.

If the reference on the box differs from the approved offer, photograph the package and markings and set the item aside for a parts check. If the supplier has offered an approved equivalent, record that equivalence in the work order rather than concealing it on the receiving sheet. This preserves the original search term for the machine parts catalog and makes future replenishment decisions easier. For the adjacent reference, see the 31314 wheel loader bearing as a separate catalog entry. The Shantui wheel loader parts range is a way to browse related systems when the job also includes additional components.

Ask for one useful record before the purchase order is raised

If a previous invoice already names the installed bearing, include the invoice line together with a current photo or the matching assembly reference. A parts history is useful when tied to the same machine and location. A line that merely says “used on loader” can belong to another machine in a mixed fleet. Where the machine has had an axle exchanged, treat the identification on the installed assembly as the evidence that needs to be reconciled with the old record.

Keep the acceptance decision separate from the installation instructions. A parts receiver checks identity and quantity. A service technician uses the machine maintenance information for bearing adjustment, assembly condition and final checks. A designation lookup contains no settings for an individual axle. The buyer can keep both records on the work order so the fitting team can locate the approved quote without using it as a service manual.

One useful comparison in a stockroom is to lay out the full codes from the labels without putting the bearings themselves together. The buyer can then compare the final digits, suffixes and manufacturer references on one sheet. Photograph the label beside the associated purchase line before moving either box. This matters during a rush shipment because the person booking the stock entry may never have seen the old bearings. If the two orders use the same short description, retaining exact codes gives that person a reliable way to keep them separate.

Frequently asked questions

Is a 31313 bearing universal for wheel loaders?

The 31313 designation identifies a bearing reference. To apply it to a particular loader, send the axle identification, installed marking and drawing position. Loader model alone provides a useful starting point when the supplier opens the catalog, but the specific assembly establishes the fitment.

Can the 31314 be used if the old bearing number is nearly unreadable?

Treat 31314 as a distinct candidate and compare the complete marks and dimensions against the drawing. The last digit is worth checking again, particularly if the first photo was taken through dirt or at an angle. Send a close-up rather than assuming that the supplier will interpret the uncertain digit.

What should the receiving team count?

Count complete bearing sets when the purchase line specifies a set. Where the workshop has asked for an individual component, reconcile the designation and quantity for that exact ring. A completed order should leave a clear record of which format was supplied.

FREE Inquiry Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+86-130-4508-1859

Get A Quote