This product is listed as a bulldozer seal ring, part number 16Y-16-00007. The record does not state which assembly it serves, its material or its dimensions. Confirm the joint location in the machine parts diagram before ordering, and keep the complete reference distinct from the other seal-ring numbers in this category.
Confirm the ring’s job, not just its name
Use the machine model and serial to find 16Y-16-00007 in the right catalogue revision. The diagram should show the groove, mating component and assembly position. Ask the supplier to confirm the listed application and any package contents. If the old ring is damaged, its appearance may be distorted; use its number and location as the stronger clues.
Service notes for a reliable seal
Before fitting, clean and inspect the groove and mating surfaces. Follow the service procedure for ring orientation and any approved lubricant. Do not stretch or twist the ring during installation, and do not add sealant unless the manufacturer specifies it. Complete the prescribed inspection or leak test after the joint is assembled. If a leak returns, check the groove and adjoining parts rather than changing to a different number without verification.
Another seal-ring reference in this group is 154-15-41130. It is a separate number; confirm application before considering any alternative.
Buyer FAQ
What assembly uses 16Y-16-00007?
The listing does not say. Confirm the diagram position with the machine serial.
Can it replace 154-15-41130?
No interchangeability is stated. Compare the manufacturer’s catalogue references.
What should I verify before fitting?
Check the exact number, groove condition, installation method and approved leak-test procedure.
