Shantui Bulldozer Washer 04081-06012
Shantui Bulldozer Washer 04081-06012 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Match washer 04081-06012 to its assembly location and original dimensions; the listing does not state material or thickness. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Shantui Bulldozer Washer 04081-06012 | Old-part label and equipment parts illustration |
| Reference | 04081-06012 | Nameplate, stamped mark or original-item label |
| Fitment | Shantui > Bulldozer parts category; exact model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Find the washer callout in the stack
A washer can control clamping or spacing, but its role depends on where it sits in the assembly. The generic item name is not a complete specification.
Inside/outside diameter, thickness, material and style are not recorded. A flat-looking part may not be interchangeable with a shim or thrust component.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Record orientation and neighboring spacers
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
A washer can control clamping or spacing, but its role depends on where it sits in the assembly. The generic item name is not a complete specification.
Inside/outside diameter, thickness, material and style are not recorded. A flat-looking part may not be interchangeable with a shim or thrust component.
Record the washer location and orientation before removal and keep any stack of shims in order. Inspect the adjacent shoulder and fastener to understand what the washer bears against.
Compare profile and thickness against the approved documentation and do not add or remove pieces simply to close a gap.
Store small washers in labeled bags by code and quantity; separate similar parts to avoid mixing them in a kit.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
Do not infer style from a generic name
Record the washer location and orientation before removal and keep any stack of shims in order. Inspect the adjacent shoulder and fastener to understand what the washer bears against.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Shantui Bulldozer Washer 04081-06012
Use the drawing callout and verified dimensions to confirm the style and quantity. Ask whether companion washers or spacers are included in the quoted line.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using 04081-06012
A practical enquiry for Shantui Bulldozer Washer 04081-06012 begins with the exact catalog line, equipment serial and a photograph of the installed item. The exact 04081-06012 reference is more useful than a generic “washer” description, but the record does not say whether it is a flat, thrust, locking or other washer design. Confirm the drawing symbol, orientation, inner and outer edges and thickness from the original assembly before substitution. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Shantui Bulldozer Washer 04081-06012
Compare profile and thickness against the approved documentation and do not add or remove pieces simply to close a gap.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Store small washers in labeled bags by code and quantity; separate similar parts to avoid mixing them in a kit.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Bolt 01010-51230; Plate 154-15-21140.
Frequently asked questions
Does this record identify the washer type?
No. Use the drawing to determine its role and style. For this record, the reference to retain is 04081-06012.
Can a similar washer be substituted?
No. Thickness and position can matter. For this record, the reference to retain is 04081-06012.
Are companion shims included?
Not stated; ask for an itemized count. For this record, the reference to retain is 04081-06012.
How should its installed position be recorded?
Keep its orientation and adjacent shims documented. For this record, the reference to retain is 04081-06012.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.