Shantui Bulldozer Bolt 01010-51230
Shantui Bulldozer Bolt 01010-51230 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Confirm bolt 01010-51230 against the original thread, length, head form and assembly position; grade and coating are not listed here. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Shantui Bulldozer Bolt 01010-51230 | Old-part label and equipment parts illustration |
| Reference | Not stated in the verified product record | Nameplate, stamped mark or original-item label |
| Fitment | Shantui > Bulldozer parts category; exact model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Verify fastener details beyond the number
A fastener is identified by more than its nominal diameter. Its thread, length, head, grade and locking method have to suit the clamped joint.
This record does not give thread pitch, strength class, finish, torque or reuse rules. Do not infer these from appearance or substitute a common bolt by size alone.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Compare length from the correct reference face
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
A fastener is identified by more than its nominal diameter. Its thread, length, head, grade and locking method have to suit the clamped joint.
This record does not give thread pitch, strength class, finish, torque or reuse rules. Do not infer these from appearance or substitute a common bolt by size alone.
Keep each removed fastener tied to its original hole where lengths may vary. Inspect the joint and mating holes, and use the prescribed tightening sequence and values from the service data.
Check the number and head marking on receipt, compare length from the correct bearing face, and verify the thread before installation without forcing it.
Bag and label by reference and quantity, protect threads from damage and list any companion washers separately on the packing record.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
Keep joint specification with the order
Keep each removed fastener tied to its original hole where lengths may vary. Inspect the joint and mating holes, and use the prescribed tightening sequence and values from the service data.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Shantui Bulldozer Bolt 01010-51230
Request an itemized fastener specification and quantity. Confirm whether washers, locking parts or companion bolts are separate line items before the machine is opened.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using Bolt 01010-51230
A practical enquiry for Shantui Bulldozer Bolt 01010-51230 begins with the exact catalog line, equipment serial and a photograph of the installed item. The record contains “Bolt 01010-51230” in its Part Number field. It does not state thread pitch, under-head length, strength class or finish. Before treating it as a replacement fastener, compare the original head markings and measure the correct length from the specified bearing surface; do not substitute by nominal diameter alone. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Shantui Bulldozer Bolt 01010-51230
Check the number and head marking on receipt, compare length from the correct bearing face, and verify the thread before installation without forcing it.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Bag and label by reference and quantity, protect threads from damage and list any companion washers separately on the packing record.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Plate 154-15-00240; Washer 04081-06012.
Frequently asked questions
Does the listing state grade and thread pitch?
No. Confirm thread, class, coating and torque from service documentation. For this record, the reference to retain is Bolt 01010-51230.
Can a bolt be matched by length alone?
No. Head form, thread and specification matter as well. For this record, the reference to retain is Bolt 01010-51230.
Are washers or locking parts included?
Not specified; request a separate quantity and item list. For this record, the reference to retain is Bolt 01010-51230.
Which service value should be used for tightening?
Use only the machine-specific approved service value. For this record, the reference to retain is Bolt 01010-51230.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.