Shantui Bulldozer Plate 154-15-21140
Shantui Bulldozer Plate 154-15-21140 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Match plate 154-15-21140 to the drawing callout, hole layout and mating face; the page does not state its assembly position or dimensions. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Shantui Bulldozer Plate 154-15-21140 | Old-part label and equipment parts illustration |
| Reference | 154-15-21140 | Nameplate, stamped mark or original-item label |
| Fitment | Shantui > Bulldozer parts category; exact model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Confirm the drawing position before naming this plate
A plate is a shape-sensitive component whose outline does not reveal whether it locates, separates, retains or covers another part. Use the exploded view to establish its role before treating the title as a complete description.
No thickness, material, hole spacing or assembly position is listed. A similar outline does not prove that mounting and contact faces match. Confirm the drawing callout and use named datums for any measurement.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Compare both faces and the fastening pattern
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
A plate is a shape-sensitive component whose outline does not reveal whether it locates, separates, retains or covers another part. Use the exploded view to establish its role before treating the title as a complete description.
No thickness, material, hole spacing or assembly position is listed. A similar outline does not prove that mounting and contact faces match. Confirm the drawing callout and use named datums for any measurement.
Record the plate orientation before removal and keep fasteners and shims with their original positions. Inspect mating faces for marks or deformation; do not force a misaligned hole or scrape a machined surface.
At receipt, compare both faces, edge profile and hole layout with the removed item and drawing. Do not install if a hole or relief differs; request clarification while labels and evidence are available.
Use flat support to prevent bending, protect both surfaces from scratches and label any companion hardware separately. Photograph the package and retain the part label for stock traceability.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
Keep the plate line separate from adjacent hardware
Record the plate orientation before removal and keep fasteners and shims with their original positions. Inspect mating faces for marks or deformation; do not force a misaligned hole or scrape a machined surface.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Shantui Bulldozer Plate 154-15-21140
A workshop request should identify the plate reference, machine serial and diagram callout. Ask the supplier to confirm plate-only scope and separately list any fasteners or shims needed for the repair.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using 154-15-21140
A practical enquiry for Shantui Bulldozer Plate 154-15-21140 begins with the exact catalog line, equipment serial and a photograph of the installed item. This is a separate catalog plate reference from 154-15-00240. The related number family is not enough to infer that the plates share a location or shape. Compare the figure callout, hole spacing, edges and contact face on the specific assembly drawing, then keep the selected reference attached to the maintenance work order. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Shantui Bulldozer Plate 154-15-21140
At receipt, compare both faces, edge profile and hole layout with the removed item and drawing. Do not install if a hole or relief differs; request clarification while labels and evidence are available.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Use flat support to prevent bending, protect both surfaces from scratches and label any companion hardware separately. Photograph the package and retain the part label for stock traceability.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Plate 154-15-00240; Rear case body 154-15-33110.
Frequently asked questions
Does the record show the plate assembly position?
No. Use the correct exploded view and machine serial to locate the plate. For this record, the reference to retain is 154-15-21140.
Are the dimensions and thickness listed?
No. Thickness and geometry are not listed; confirm the drawing dimensions. For this record, the reference to retain is 154-15-21140.
Are shims or bolts included?
The package scope is not itemized. Ask for an explicit list. For this record, the reference to retain is 154-15-21140.
What evidence should accompany the order?
Send both face photos, the serial and the diagram callout. For this record, the reference to retain is 154-15-21140.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.