Shantui Bulldozer Rear Case Body 154-15-33110
Shantui Bulldozer Rear Case Body 154-15-33110 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Identify rear case body 154-15-33110 by the assembly drawing, locating faces and machined openings. Confirm whether the quotation is for the body alone. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Shantui Bulldozer Rear Case Body 154-15-33110 | Old-part label and equipment parts illustration |
| Reference | 154-15-33110 | Nameplate, stamped mark or original-item label |
| Fitment | Shantui > Bulldozer parts category; exact model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Map the case body to its assembly
A case body is a structural housing whose bores and mating faces locate related parts. The title does not establish its internal build or supplied accessories.
Material, machining tolerances, covers, plugs and internal components are not itemized. Confirm the housing callout and body-only versus assembled scope.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Compare machined interfaces, not only outline
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
A case body is a structural housing whose bores and mating faces locate related parts. The title does not establish its internal build or supplied accessories.
Material, machining tolerances, covers, plugs and internal components are not itemized. Confirm the housing callout and body-only versus assembled scope.
Photograph covers, shims and locating pins before dismantling. Inspect adjacent housings and shafts so the replacement scope addresses the actual fault rather than the visible case alone.
Compare ports, bores, machined faces and locating features with the drawing before assembly; use the specified datum and alignment procedure.
Guard machined edges and bosses, secure the housing against impact and label covers or plugs as separate pieces if shipped.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
List covers and internals separately
Photograph covers, shims and locating pins before dismantling. Inspect adjacent housings and shafts so the replacement scope addresses the actual fault rather than the visible case alone.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Shantui Bulldozer Rear Case Body 154-15-33110
Request an exploded-view callout and a written list of the body and all included pieces. Record any reused cover or plug that has to transfer to the replacement.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using 154-15-33110
A practical enquiry for Shantui Bulldozer Rear Case Body 154-15-33110 begins with the exact catalog line, equipment serial and a photograph of the installed item. The record identifies a rear case body with reference 154-15-33110. It does not state whether bearings, covers, plugs or other internals are included. Compare the case outline and machined faces with the exploded view, and make the quotation state body-only versus assembled supply so receiving staff can check the correct scope. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Shantui Bulldozer Rear Case Body 154-15-33110
Compare ports, bores, machined faces and locating features with the drawing before assembly; use the specified datum and alignment procedure.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Guard machined edges and bosses, secure the housing against impact and label covers or plugs as separate pieces if shipped.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Plate 154-15-21140; Shaft 155-15-12212.
Frequently asked questions
Are internal components included?
The listing does not itemize them. Request a written scope. For this record, the reference to retain is 154-15-33110.
Can the housing be identified from shape alone?
No. Machined interfaces and the correct assembly view are needed. For this record, the reference to retain is 154-15-33110.
Are material and tolerances published?
No. These details are absent. For this record, the reference to retain is 154-15-33110.
What should the quote list?
Name every included body, cover, plug and internal part. For this record, the reference to retain is 154-15-33110.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.