Shantui Bulldozer Oil Cylinder Body 155-15-11152
Shantui Bulldozer Oil Cylinder Body 155-15-11152 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Confirm cylinder body 155-15-11152 by the cylinder assembly drawing, mounts and ports; included rod, seals and internals are not stated. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Shantui Bulldozer Oil Cylinder Body 155-15-11152 | Old-part label and equipment parts illustration |
| Reference | 155-15-11152 | Nameplate, stamped mark or original-item label |
| Fitment | Shantui > Bulldozer parts category; exact model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Separate cylinder body from full assembly
The catalog names a cylinder body, which is not automatically a complete hydraulic cylinder. The assembly drawing is needed to separate body from rod, piston, gland and seal kit.
Bore, stroke, ports, mounts, pressure rating and included components are not listed. Confirm body-only versus assembly and the machine serial before ordering.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Compare ports, mounts and body orientation
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
The catalog names a cylinder body, which is not automatically a complete hydraulic cylinder. The assembly drawing is needed to separate body from rod, piston, gland and seal kit.
Bore, stroke, ports, mounts, pressure rating and included components are not listed. Confirm body-only versus assembly and the machine serial before ordering.
Record leak location and visible damage before disassembly. Follow the manual to isolate and depressurize the system; inspect ports and mounts without assuming dimensions from an image.
Compare ports, orientation and mounts with the approved drawing. Keep machined surfaces covered and use proper measurement procedures for any critical bore.
Cap ports against contamination, support the body at safe points and protect mounting ears and machined surfaces during transport.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
Confirm supply scope before disassembly
Record leak location and visible damage before disassembly. Follow the manual to isolate and depressurize the system; inspect ports and mounts without assuming dimensions from an image.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Shantui Bulldozer Oil Cylinder Body 155-15-11152
Ask the quotation to enumerate the body, end covers, rod, piston and seals rather than using “cylinder” as an undefined package description.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using 155-15-11152
A practical enquiry for Shantui Bulldozer Oil Cylinder Body 155-15-11152 begins with the exact catalog line, equipment serial and a photograph of the installed item. The catalog names an oil-cylinder body, not a complete cylinder assembly. It gives reference 155-15-11152 but does not list a rod, piston, seals, ports, bore or mounting dimensions. Ask whether the offer covers only the body or a broader assembly, and compare the mounting and connection details against the removed component. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Shantui Bulldozer Oil Cylinder Body 155-15-11152
Compare ports, orientation and mounts with the approved drawing. Keep machined surfaces covered and use proper measurement procedures for any critical bore.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Cap ports against contamination, support the body at safe points and protect mounting ears and machined surfaces during transport.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Seal ring 155-15-12820; O-ring 175-15-42430.
Frequently asked questions
Is a complete cylinder supplied?
The title says cylinder body; rods, seals and other parts are not specified. For this record, the reference to retain is 155-15-11152.
Are bore and stroke stated?
No. Get the assembly specification. For this record, the reference to retain is 155-15-11152.
What details confirm the body?
Compare ports, mounts and the exact drawing callout. For this record, the reference to retain is 155-15-11152.
What safety step precedes removal?
Follow the manual to isolate and depressurize the system. For this record, the reference to retain is 155-15-11152.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.