Shantui Bulldozer Spiral Bevel Gear 154-21-22120
Shantui Bulldozer Spiral Bevel Gear 154-21-22120 is the catalog reference for this page. The details below are written for purchasing and service teams who need to match an existing component, not for guessing from a broad machine family. Verify spiral bevel gear 154-21-22120 by the matching gear pair, tooth form and axle drawing; ratio and dimensions are not stated. Confirm the correct assembly drawing, equipment serial and supplied scope before purchase.
Start with the number and nameplate where they are available; then compare the machine, assembly and interfaces. If the record does not state a dimension, electrical value, supply scope or serial break, treat that information as unconfirmed and ask for it before order release.

| Order check | Current record | Evidence to confirm |
|---|---|---|
| Product | Shantui Bulldozer Spiral Bevel Gear 154-21-22120 | Old-part label and equipment parts illustration |
| Reference | 154-21-22120 | Nameplate, stamped mark or original-item label |
| Fitment | Shantui > Bulldozer parts category; exact model and serial range are not specified. | Machine model, serial and assembly version |
| Package scope | Catalog does not itemize accessories | Confirm each quantity and included item on the quotation |
Identify the mating gear before ordering
A bevel gear must be verified with its mating gear and assembly setup. A single item name does not establish ratio, pair or adjustment requirements.
Tooth count, ratio, hand, material and matched-pair status are not listed. Use the axle drawing and supplier confirmation rather than inferring from appearance.
That distinction is important when equipment is maintained across more than one model year or configuration. A useful product page can explain what to compare, but it cannot replace the parts book for the exact serial range. Keep the inquiry tied to the machine that will receive the part; do not merge details from another unit merely because its name looks similar.
Preserve adjustment parts by position
The fastest way to reduce back-and-forth is to send a compact evidence set with the first inquiry. Use the checklist below as a job-preparation step, and label each image with the component or position it shows.
A bevel gear must be verified with its mating gear and assembly setup. A single item name does not establish ratio, pair or adjustment requirements.
Tooth count, ratio, hand, material and matched-pair status are not listed. Use the axle drawing and supplier confirmation rather than inferring from appearance.
Keep shims and adjustment parts by location, photograph the gear pair before dismantling and inspect the mating gear. Follow machine-specific setup values for backlash and contact.
Check markings and tooth form against the approved order, protect the edges and keep the original adjustment parts labeled for the technician.
Protect gear teeth from impact; do not let loose metal parts contact the teeth in transit. Record carton and item labels at receiving.
State the requested quantity and whether the old item is available for side-by-side inspection.
Ask the supplier to list any unresolved fitment point directly on the quotation.
Use the approved gear setup procedure
Keep shims and adjustment parts by location, photograph the gear pair before dismantling and inspect the mating gear. Follow machine-specific setup values for backlash and contact.
When a part number is present, compare it character by character, including hyphens, suffixes and multiple references. When the number field is blank or contains an instruction to verify, do not turn that wording into a fabricated MPN. Use the equipment identification and physical evidence to establish the item, then keep the confirmation with the work order.
Dimensions can help, but they are meaningful only when the measuring points are clear. Record the unit, the point-to-point location and the orientation of the measurement. For electrical or hydraulic parts, a photo of the connector or port layout is not a substitute for the wiring or circuit diagram; it is supporting evidence for the technician and supplier.
Service notes for Shantui Bulldozer Spiral Bevel Gear 154-21-22120
Request confirmation whether the part is sold singly or as a matched set. Include the axle tag, machine serial, gear callout and mating gear reference.
Separate observed symptoms from the suspected cause in the repair request. “Intermittent,” “leaking,” “slow” or “no response” describe what someone sees; they do not alone prove which component has failed. Preserve fault notes, inspection images and any test results that the technician considers appropriate. This makes a later inquiry easier to trace and helps prevent unnecessary repeat orders.
A quote scenario using 154-21-22120
A practical enquiry for Shantui Bulldozer Spiral Bevel Gear 154-21-22120 begins with the exact catalog line, equipment serial and a photograph of the installed item. This page labels the component a spiral bevel gear and records 154-21-22120. It does not provide tooth count, ratio, hand, mating-gear number or contact pattern. A gear should be evaluated as part of the specified pair and assembly; do not approve it by outer appearance alone. The quotation should state the confirmed reference and every included component.
This is an example of a verification workflow, not a reported customer case or a promise that the listed part will correct a fault. If the diagnosis changes after disassembly, update the parts request before shipment. If the component is part of a larger assembly, ask whether the supplier is quoting the complete assembly or only the identified subcomponent.
Receiving checks for Shantui Bulldozer Spiral Bevel Gear 154-21-22120
Check markings and tooth form against the approved order, protect the edges and keep the original adjustment parts labeled for the technician.
Before installation, compare the supplied item with the written confirmation and approved service information. Keep machined, sealing, electrical or hydraulic interfaces protected until the work area is ready. Use the correct tools and procedures for the equipment; where a torque, pressure, calibration, clearance or adjustment value is not published in the record, obtain it from the proper technical source rather than estimating it.
Packing and traceability for this part
Protect gear teeth from impact; do not let loose metal parts contact the teeth in transit. Record carton and item labels at receiving.
For a multi-item order, keep each component matched to its part number and work-order line. Small seals, clips, connectors or fittings should be individually identified if included. Photograph the carton labels and item markings at receiving, check quantities against the packing list, and document any transit damage before the part is mixed with workshop stock.
Related product references
The linked catalog entries can help compare adjacent service items, but a related page is not evidence of interchangeability. Confirm each application independently: Wheel loader differential cage 50M reference; Shaft 155-15-12212.
Frequently asked questions
Does the page state ratio or tooth count?
No. Confirm pair geometry from verified technical data. For this record, the reference to retain is 154-21-22120.
Is the mating gear included?
The package scope is not stated. For this record, the reference to retain is 154-21-22120.
Can the gear be matched by appearance?
No. Confirm the pair and setup requirements. For this record, the reference to retain is 154-21-22120.
What should happen to the shims?
Label their locations and follow the service procedure. For this record, the reference to retain is 154-21-22120.
What to send for a confirmed quotation
Include the full machine model and serial, the complete engine or chassis plate where relevant, the product or old-part marking, clear photos of mounting and connection points, and any applicable diagram callout. State the quantity and required supply scope. If a number is missing, say so; a legible photo and a specific question are more useful than an invented part number. For cross-border shipments, also state the destination and the timing required for the maintenance plan.
Once the identity and scope are confirmed, keep the supplier’s written response with the order documents. That record helps the receiving team reconcile the item and gives the technician a clear basis for pre-installation checks.